First Time Use
Before using your toaster for the first time, operate the toaster without bread. As with all new electric heating elements, your toaster will emit a ‘new’ smell when it is first switched on. This is quite normal and not a cause for concern.
See below:
1. Place the sliced bread into the bread slots.
2. Adjust the Browning Control to the desired setting.
3. Lower the Bread Carriage Lever(s). The toaster will begin toasting the bread.
4. When completed, the Bread Carriage Lever(s) will automatically rise and lift the toast from the toaster.
1. When the appliance has cooled down completely, tap the sides of the case lightly to dislodge any crumbs lodged in the Bread Slots.
2. Press the Crumb Trays to unlock and remove from the toaster.
3. Empty the Crumb Trays and replace, push to lock back into place.
To reheat already toasted bread, turn the Browning Control to position 1 and press the Bread Carriage Lever down. Your toaster will reheat your toast.
To defrost frozen bread for toasting, adjust the Browning Control by increasing the browning level by 1 from your desired browning level. (E.g. increasing 4 to 5), and lower the Bread Carriage Lever. This will defrost and toast your bread to the desired level.
- In order to achieve uniform browning, we recommend you wait a minimum of 30 seconds between each toasting cycle, so that the control can be automatically reset.
- If toasting one slice only, you may need to adjust the Browning Control to a slightly lower setting. You may notice a slight variation in toast colour on one side of a single slice.
- When toasting 2 slices it is recommended they are of equal size and freshness.
- Stale bread toasts more rapidly than fresh bread. Therefore, the Browning Control should be set at a lower setting than usual.